Click to change. You are shopping at branch: 665 E Main St, Mt Orab
0 $0.00
Ok
Loading…
0
Drylok

Drylok Clear Floor & Wall Masonry Waterproofer, 1 Gal.

Category Masonry
770863
Starting from
$57.99 / GAL
/
- +
Check stock in other branches
Your pick-up branch is 665 E Main St, Mt Orab
Add to quick list
Compare
Drylok

Drylok Clear Floor & Wall Masonry Waterproofer, 1 Gal.

Item Code: 770863
Non-pigmented waterproofer formulated for floor and wall surfaces is easy to clean and leaves a non-yellowing finish. Perfect for waterproofing interior and exterior concrete floors, poured concrete walls, split-faced block, concrete and cinder block, stone, brick, stucco, and pre-cast decorative items. Incorporates ISP CleanGuard, environmentally safe green biocides, to resist the growth of mildew on the dry paint film. Tested in accordance to requirements of ASTM D-7088 (American Society for Testing and Materials) Resistance to Hydrostatic Pressure at 4 psi (pounds per square inch) and ASTM D-6904 Resistance to Wind Driven Rain of 98 mph.
Category Masonry
  • Clear waterproofer and vapor barrier for masonry floors and walls
  • Interior/exterior above/below grade horizontal/vertical surfaces
  • High-gloss clear finish or topcoat with paint, floor coverings
  • Creates a moisture vapor barrier on floors as a finish coat or under latex paint or as a primer prior to applying floor coverings
  • Reduces radon gas penetration and stops hydrostatic pressure
  • 50 minimum working temperature, 90 maximum working temperature
Non-pigmented waterproofer formulated for floor and wall surfaces is easy to clean and leaves a non-yellowing finish. Perfect for waterproofing interior and exterior concrete floors, poured concrete walls, split-faced block, concrete and cinder block, stone, brick, stucco, and pre-cast decorative items. Incorporates ISP CleanGuard, environmentally safe green biocides, to resist the growth of mildew on the dry paint film. Tested in accordance to requirements of ASTM D-7088 (American Society for Testing and Materials) Resistance to Hydrostatic Pressure at 4 psi (pounds per square inch) and ASTM D-6904 Resistance to Wind Driven Rain of 98 mph.

Specifications

Weight

9.25lb

Height

7.7in

Width

7.5in

Length

7.5in

Application

Ready Mix

Base Material

Latex

Brand

Drylok

Category

Masonry Waterproofer

Color

Clear

Container Size

1 gal.

Coverage Area (Sq. Ft.)

100

Finish

High-Gloss

Interior/Exterior

Interior/Exterior

Shelf Life

5 Yr.

Non-pigmented waterproofer formulated for floor and wall surfaces is easy to clean and leaves a non-yellowing finish. Perfect for waterproofing interior and exterior concrete floors, poured concrete walls, split-faced block, concrete and cinder block, stone, brick, stucco, and pre-cast decorative items. Incorporates ISP CleanGuard, environmentally safe green biocides, to resist the growth of mildew on the dry paint film. Tested in accordance to requirements of ASTM D-7088 (American Society for Testing and Materials) Resistance to Hydrostatic Pressure at 4 psi (pounds per square inch) and ASTM D-6904 Resistance to Wind Driven Rain of 98 mph.

Specifications

Weight

9.25lb

Height

7.7in

Width

7.5in

Length

7.5in

Application

Ready Mix

Base Material

Latex

Brand

Drylok

Category

Masonry Waterproofer

Color

Clear

Container Size

1 gal.

Coverage Area (Sq. Ft.)

100

Finish

High-Gloss

Interior/Exterior

Interior/Exterior

Shelf Life

5 Yr.

SEARCH ×