Click to change. You are shopping at branch: 665 E Main St, Mt Orab
0 $0.00
Ok
Loading…
0
HILLMAN

Hillman 1/8 In. Extra-Short Drive Hollow Wall Anchor (2 Ct.)

Category Wall Anchors
731323
Starting from
$2.79 / PKG
/
- +
Check stock in other branches
Your pick-up branch is 665 E Main St, Mt Orab
Add to quick list
Compare
HILLMAN

Hillman 1/8 In. Extra-Short Drive Hollow Wall Anchor (2 Ct.)

Item Code: 731323
Primarily used in drywall, the Drive Wall Anchor is a medium duty fastener for use in drywall, plaster and tile. The tip has a drive point to pierce drywall easily; no pre-drilling is required. The two prongs on the head of the shell, prevent the anchor from rotating during expansion. When the anchor is fully expanded, spider-like legs draw tightly against the backside of the wall. Once the body of the anchor is installed, the screw can be changed without disrupting the anchor.
Category Wall Anchors
  • Greater holding power than nails and screws in hollow wall
  • Common applications include mirrors, pictures, bathroom fixtures, curtains, etc.
  • Fixtures can be easily removed and later replaced without disturbing the anchor
Primarily used in drywall, the Drive Wall Anchor is a medium duty fastener for use in drywall, plaster and tile. The tip has a drive point to pierce drywall easily; no pre-drilling is required. The two prongs on the head of the shell, prevent the anchor from rotating during expansion. When the anchor is fully expanded, spider-like legs draw tightly against the backside of the wall. Once the body of the anchor is installed, the screw can be changed without disrupting the anchor.

Specifications

Weight

0.04lb

Height

0.75in

Width

2in

Length

4.5in

Brand

HILLMAN

Category

Hollow Wall Anchor

Diameter

1/8 In. X-Short

Drill Size

1/4 in.

Finish

Zinc

Head Type

Truss

Material

Steel

Wall Thickness

1/8 to 1/4 In.

Primarily used in drywall, the Drive Wall Anchor is a medium duty fastener for use in drywall, plaster and tile. The tip has a drive point to pierce drywall easily; no pre-drilling is required. The two prongs on the head of the shell, prevent the anchor from rotating during expansion. When the anchor is fully expanded, spider-like legs draw tightly against the backside of the wall. Once the body of the anchor is installed, the screw can be changed without disrupting the anchor.

Specifications

Weight

0.04lb

Height

0.75in

Width

2in

Length

4.5in

Brand

HILLMAN

Category

Hollow Wall Anchor

Diameter

1/8 In. X-Short

Drill Size

1/4 in.

Finish

Zinc

Head Type

Truss

Material

Steel

Wall Thickness

1/8 to 1/4 In.

SEARCH ×