Click to change. You are shopping at branch: 665 E Main St, Mt Orab
0 $0.00
Ok
Loading…
0
Simpson Strong-Tie

Simpson Strong Tie 8.5 Oz. High-Strength Epoxy Adhesive with Nozzle & Extension

Category Epoxy
106674 106674
106674 106674
106674 106674
Starting from
$27.99 / EACH
/
- +
Check stock in other branches
Your pick-up branch is 665 E Main St, Mt Orab
Add to quick list
Compare
Simpson Strong-Tie

Simpson Strong Tie 8.5 Oz. High-Strength Epoxy Adhesive with Nozzle & Extension

Item Code: 106674
SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40F (4C) to 100F (38C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.
Category Epoxy
  • Superior bond strengths permit ductile solutions in high seismic areas
  • Improved sustained load performance at elevated temperature
  • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning
  • Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring
  • Low-odor formulation
  • For use with potable water
warning sign WARNING
WARNING! This product can expose you to chemicals including bisphenol-A and epichlorohydrin which are known to the State of California to cause cancer birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40F (4C) to 100F (38C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.

Specifications

Weight

1.16lb

Height

10.05in

Width

1.95in

Length

2.9in

Brand

Simpson Strong-Tie

Category

Anchor Adhesive

Color

Gray

Container Size

8.5 Oz.

Cure Time

24 Hr.

Material

Epoxy

Shelf Life

24 Mo.

SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40F (4C) to 100F (38C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.

Specifications

Weight

1.16lb

Height

10.05in

Width

1.95in

Length

2.9in

Brand

Simpson Strong-Tie

Category

Anchor Adhesive

Color

Gray

Container Size

8.5 Oz.

Cure Time

24 Hr.

Material

Epoxy

Shelf Life

24 Mo.

SEARCH ×